Skip to content
Reed Electrical Licensed & Insured Mon–Fri 8AM–5PM
Reed Electrical logo
Pacific Northwest residential setting — electrician serving Port Townsend, WA

Jefferson County, WA

Electrician in Port Townsend, WA | Reed Electrical

Local, owner-operated residential electrical service for Port Townsend homeowners and builders since 2010.

Port Townsend is about 15 minutes north of Port Hadlock via SR-20

Travel estimates vary with the property, traffic and road conditions. Visit timing is agreed when scheduling.

Your Port Townsend residential electrician

Port Townsend is Jefferson County's county seat and one of the most distinctive towns in Washington. Reed Electrical serves homeowners across Port Townsend — from Uptown's Victorian homes to Downtown's waterfront, Castle Hill, Morgan Hill and the newer neighborhoods out toward the Port Townsend Golf Course and Fort Worden.

Port Townsend is about 15 minutes from our Port Hadlock base via SR-20, so we're in town regularly.

Port Townsend homes and their electrical needs

Port Townsend's historic district is famous for its 19th-century Victorian homes. They're beautiful, but many contain knob-and-tube wiring, cloth-insulated cable and decades of patchwork updates. Rewiring these homes takes care to protect plaster, trim and original details.

Beyond the historic core, Port Townsend has mid-century homes, 1970s–90s construction and a growing number of new homes and ADUs. Waterfront homes near Point Hudson and along the bluffs face salt air that corrodes panels and outdoor fixtures faster than inland.

Whatever brings you to us, you'll work directly with Ron Reed, who brings 22 years of experience to every job. We pull permits when required, keep the job site clean, and explain your options in plain language.

Preserving character while improving electrical safety

Port Townsend's older homes call for an electrical plan that respects the building as well as the new equipment. In Uptown or around Morgan Hill, original trim and finished plaster can make access very different from an unfinished new house. Before a rewire or remodel, discuss which walls will be opened, how rooms will remain usable and whether earlier alterations are documented. An old home's age alone cannot establish the condition of every circuit. Inspection and troubleshooting help distinguish wiring that needs replacement from later work that can remain, so the scope follows the actual house rather than assumptions about Victorian construction.

Panel capacity for modern comfort

A home near Castle Hill or the waterfront may have gained new appliances over several decades without a coordinated electrical plan. Adding electric cooking, a heat pump or an EV charger is a good time to review the service and panel together. Empty breaker spaces are not the same as available electrical capacity, and a breaker that fits physically is not automatically appropriate for the panel. Reed Electrical can evaluate the proposed loads and discuss dedicated circuits, panel upgrades or service work. Keeping equipment specifications available makes the conversation more useful and helps avoid buying a charger or appliance before its electrical requirements are understood.

Wind and salt air near Port Townsend Bay

A waterfront location introduces questions that an inland remodel may not. Outdoor enclosures, light fixtures and connections should suit their exposure, and visible corrosion deserves attention rather than a cosmetic cover-up. Winter wind can also interrupt utility power. If you are considering backup power, decide which household functions matter most and discuss the transfer equipment needed to isolate the home from the utility supply. A generator should never feed the house through a standard outlet. Portable equipment must operate outdoors away from openings; a standby installation also needs appropriate siting and clearances. Planning ahead is separate from utility restoration or emergency response.

Scheduling a Port Townsend project

The trip from Port Hadlock follows SR-20, with travel time depending on traffic and the property's location. When arranging work, identify the neighborhood and explain whether the request is a repair, an addition, or a larger modernization. For a historic-home project, photographs of the accessible panel and any existing plans can help frame the initial discussion without requiring you to open electrical equipment. You will work directly with Ron Reed, whose residential focus includes older homes and new construction. Call during weekday business hours to discuss a free estimate, the likely sequence of work and any coordination needed with your remodeler.

Bring the room layout into the conversation

A Port Townsend remodel can involve original rooms, later additions and new uses within the same residence. Mark the locations where you want task lighting, receptacles or appliance connections on the current plan. This gives the electrical discussion more substance than simply asking for more outlets. Existing access, ceiling finishes and circuit condition can then be reviewed in relation to those goals. If preservation or property-owner requirements apply, identify them before work is scheduled. Electrical planning should support the use of the home while acknowledging that an older building may require a different installation sequence from an unfinished new house.

Why choose us

Why Port Townsend chooses Reed Electrical

Licensed & insured. Owner-operated since 2010, with 22 years of experience.

Owner-operated

When you call, you get Ron Reed. The person who quotes your job is the person who does it.

Local to the peninsula

Based in Port Hadlock-Irondale, with short drive times across Jefferson County and nearby.

Older, rural & waterfront homes

Knob-and-tube, salt-air corrosion, long service runs and well pumps are everyday work.

Clean & on time

We show up when we say, protect your floors, and leave the job site tidy.

FAQ

Port Townsend electrician FAQ

Do you work on historic Victorian homes?

Yes. We rewire and upgrade older homes with care for original plaster and trim.

Can you replace knob-and-tube in Port Townsend?

Yes, it's one of the most common projects we do in Port Townsend's older neighborhoods.

Do you install EV chargers in Port Townsend?

Yes, along with any panel or service upgrades needed to support them.

What should I have ready when calling about my Port Townsend home?

Describe the affected rooms or proposed equipment and any remodel plans. Call (360) 301-0333 Monday–Friday, 8 AM–5 PM; do not open electrical equipment yourself to gather information.

Homeowner reviews

Reviews from Reed Electrical's HomeAdvisor profile; no town-specific project is implied.

“Willing to go above and beyond.”

Electrical Switches, Outlets & Fixtures Install or Repair

Yes, I recommend this pro

Jeremy

Jun 2022

HomeAdvisor verified review
“Did the job at a good rate and showed on time. Easy to work with.”

Electrical Switches, Outlets & Fixtures Install or Repair

Yes, I recommend this pro

Ken F.

Apr 2014

HomeAdvisor verified review
“I live in an older home built in the early 1950s. I've had two professional electricians who tried to fix my non-functioning, connected front porch and living room ceiling light, to no avail. When Reed Residential Electric came to my home he analyzed a complex situation (a home with lots of remodeling over the years) and came to a solution. I have working lights again and so grateful! I highly recommend Reed Residential Electric.”

Electrical Switches, Outlets & Fixtures Install or Repair

Yes, I recommend this pro

Laurie M.

Nov 2013

HomeAdvisor verified review

Need an electrician in Port Townsend?

Call Ron at (360) 301-0333 or request a free estimate. Monday–Friday, 8 AM–5 PM. Serving Port Hadlock & Jefferson County.

Call Get an Estimate